바로클릭 2026 요즘 sns에서 난리난 Woopker 사운드 앰프 TPA3116 D2 100W 미니 HiFi 스테레오 클래스 D 앰프 Bluetooth 오디오 앰프 우퍼 트위터 홈 시어터  리뷰 최다로 엄선된 최고의 제품을 소개합니다.

Feature:

● Using chip TPA3116D2, designed for customers who pursue HiFi sound, a small and compact design but practical and powerful small HiFi Bluetooth wireless amplifier;

● Support two stereo RCA audio inputs, one AUX input and OPT output, with USB socket

● Bluetooth 5.3 core, with a longer connection range to ensure low signal latency. No popping sound and no noise when establishing a Bluetooth connection;

●Maximum output 100W x 2 speakers (both active and passive speakers can be connected, only for active subwoofers), it is not recommended to use a power supply below 24V;

● Advanced circuit design, built-in speaker protection circuit, most suitable for bookshelf/computer/desktop/speaker in your home;

● We offer friendly customer service, you can contact us with any questions!

Specification:

Model: AK-3116
Power amplifier chip: TPA3116*2
MAX Power Output: 100W x 2 (4 ohm/24V Load)
Input Mode: Bluetooth & RCA
Bluetooth version: Bluetooth 5.0 (30m without obstruction)
Power supply voltage: DC 24V, current 5A or above, voltage socket 5.5*2.1mm, external negative pole and internal positive pole (recommended DC 24V/5A-8A)
Output impedance: 4-8 ohms
Output power: left and right channels 100W+100W, 4 ohm load, 2.0 channels.
Frequency response: 20-20KHz
Distortion: 0.1%
Signal-to-noise ratio: >82dB
Sensitivity: 82db
Left and right channel bass adjustment range: +12db-14db

Note:

1. Don’t use cheap audio signal cables. The wires themselves are not shielded. High-frequency noise will be introduced. The louder the potentiometer rotates, the louder the noise.
2The correct order of use of the power supply is to connect the power supply of the notebook power supply and the power amplifier first, and then let the notebook power supply connect to the mains. The wrong way is to first connect the laptop power supply to the power supply and then connect the laptop plug to the digital amplifier. Because there is a filter capacitor in the digital function, these will produce a slight low-voltage spark of 0.1 seconds, although it has no effect on performance, but this habit is not good.
3. Use a power supply with as much current as possible. If only a 2-3A power supply is used, the output performance will be greatly limited.

Package Included:

1 x Power Amplifier
1 x User Manual
1 x 24V/5A power Adapter
1 x Remote Control
1 x Bluetooth Antenna
1 x Packing the box